GTX is Vaporesso’s hardest-working coil platform: one push-fit mesh coil family that runs from tight mouth-to-lung pods all the way to 75W direct-lung tanks. These are genuine Vaporesso GTX mesh coils, sold as a pack of 5 in all seven resistances. Two warnings before anything else, because this family has the worst naming traps in vaping. First: GTX is not GTi – GTi coils fit the iTank family (Target 80/100/200, GEN 80S/200, Armour) and do not fit any device on this page, and GTX coils do not fit theirs. Second: not every GTX coil suits every GTX device – the small pods cannot run the big direct-lung coils. The compatibility section below gives the exact split per device, so check it before choosing your resistance.
GTX Coils Price in Dubai UAE
The pack of 5 costs AED 40 at Vapor Fantasy, whichever resistance you choose. A frank note on pricing: like the RPM 3 coils we added recently, GTX coils are oddly absent from UAE shops – our checks found no other UAE online seller listing them – so this price is set from international pricing for the same 5-pack (around GBP 9.99 in the UK) and sits in line with the UAE’s 5-pack coil shelf. Cash on delivery, same-day delivery in Dubai, free shipping on orders over AED 300.
Choose Your Coil
Available Resistances
- 0.15Ω Mesh (60-75W) – the full direct-lung coil: maximum vapour for the 80W devices. High-power pods and tanks only.
- 0.2Ω Mesh (45-60W) – dense, warm DTL vapour; the coil the Target PM80 and GEN Nano kits lead with.
- 0.3Ω Mesh (32-45W) – restricted direct-lung with strong flavour at moderate power.
- 0.4Ω Mesh (26-32W) – the crossover coil: loose MTL to restricted DL, and the lowest resistance the GTX One Pro supports.
- 0.6Ω Mesh (20-26W) – the other crossover: works in both DTL and MTL pods, gentle enough for the Target PM30.
- 0.8Ω Mesh (12-16W) – a true mouth-to-lung coil for nic salts in the MTL pods.
- 1.2Ω Mesh (8-12W) – the tightest, coolest draw in the range, made for high-strength salts.
Vaporesso also makes Dual Mesh versions of the 0.15, 0.2 and 0.3Ω coils – the Luxe XR Max 2 supports them in its DTL pod. The options here are the standard Mesh line stocked worldwide; if the wattage range printed on your coil differs slightly from the figures above, the printing on the coil wins – Vaporesso’s own pages vary by a watt or two between editions.
Compatibility – Read This Before Ordering
The pod or tank decides the coil, and each one takes only part of the range. Vaporesso’s own split runs at 0.6Ω: DTL pods and tanks take the low coils, MTL pods take the high ones, and 0.6Ω works in both worlds.
Full range, 0.15-1.2Ω: the Target PM80 (its pod also takes the GTX RBA), the Swag PX80, and the GEN Nano with its GTX Tank 22 – all 80W devices that can drive every coil here.
Restricted – higher resistances only: the Target PM30 is a 30W device – use 0.6, 0.8 or 1.2Ω; the 0.15/0.2/0.3Ω coils need more power than it has, even though they physically fit. The GTX One Pro manual lists exactly four coils – 0.4, 0.6, 0.8 and 1.2Ω Mesh – so those are its options.
Luxe XR family (via the empty XR pods): the XR DTL pod takes 0.15-0.6Ω and the XR MTL pod takes 0.6, 0.8 and 1.2Ω – but the device’s power matters too. The Luxe XR Max and Luxe XR Max 2 (80W) run the full pod range; the 40W Luxe XR should stay at 0.3Ω and above in the DTL pod. If you use the integrated Luxe X pods instead, you don’t need coils at all – the coil is built into those pods.
Not GTX: the FORZ TX80’s tank takes GTR coils only – no GTX coil fits it. And GTi devices (Target 80 iTank edition, Target 100/200, GEN 80S/200, Armour series) take GTi coils, which we stock in coils – one letter apart, completely different coil.
Changing a GTX Coil
GTX coils are push-fit: pull the pod or tank, pull the old coil straight out, push the new one in until the seals seat. Prime it properly – a few drops of liquid on the cotton ports, fill, then wait five to ten minutes before firing; the larger mesh in the low-resistance coils drinks a lot of liquid on first fill, and a dry hit will scorch it for good. Expect one to two weeks per coil, less at high wattage with sweet liquids.
What’s in the Pack
- 5 x Vaporesso GTX mesh coils in your chosen resistance
Delivery in Dubai and Across the UAE
Order before the cut-off and your coils can be with you the same day in Dubai, with fast delivery across the rest of the UAE as well. Every order is cash on delivery, and shipping is free on orders over AED 300. Not sure which GTX resistance your device takes? Message us on WhatsApp with your device name and we will match the coil before you order.
Frequently Asked Questions
How much are Vaporesso GTX coils in Dubai UAE?
A pack of 5 costs AED 40 at Vapor Fantasy in Dubai UAE, in any of the seven mesh resistances. We found no other UAE online seller listing GTX coils, so the price is set from UK pricing for the same 5-pack.
What is the difference between GTX and GTi coils?
They are different coil lines that do not fit each other. GTX coils serve Vaporesso’s pods and small tanks (Target PM80/PM30, Swag PX80, GEN Nano, GTX One Pro, Luxe XR pods). GTi coils serve the iTank family – Target 80/100/200, GEN 80S/200 and Armour.
Which GTX coils fit the Target PM30?
The 0.6, 0.8 and 1.2 ohm mesh coils. The PM30 is a 30W device, so the 0.15, 0.2 and 0.3 ohm direct-lung coils cannot be driven in their wattage range even though they physically fit the pod.
Do GTX coils fit the FORZ TX80?
No. The FORZ TX80’s FORZ Tank 25 takes GTR coils only (0.15 and 0.4 ohm) – no GTX coil fits it, and GTR coils fit nothing else.
Which GTX coil is best for nic salts?
The 0.8 ohm for a balanced MTL draw or the 1.2 ohm for the tightest, coolest draw – in an MTL pod such as the Luxe XR MTL pod, a Target PM30 or a GTX One Pro. The 0.15-0.3 ohm coils are direct-lung coils for freebase liquid.
Reviews
There are no reviews yet.