The OXVA Xlim Go 2 is the simplest serious pod kit OXVA makes. There is no screen, no button and no wattage menu: you fill the pod, click it in, and the kit reads the pod and sets the power itself. What makes this second generation worth the upgrade is everything underneath that simplicity – a 1500mAh battery (half as much again as the first Xlim Go), UniTech 2.0 mesh pods, and a body that weighs just 45.9 grams, lighter than most disposables people carry around Dubai.
It runs the full XLIM pod platform, so every top fill, V2 and EZ cartridge in the range fits, in resistances from 0.4Ω to 1.2Ω. If you want a refillable kit that behaves like a disposable – pick it up and vape, nothing to learn – but costs a fraction as much to run, this is the one we point people at.
Xlim Go 2 Price in Dubai and the UAE
The OXVA Xlim Go 2 costs 78 AED at Vapor Fantasy. In the box you get the device with a 0.8Ω XLIM Top Fill cartridge already fitted, ready for nic salts or 50/50 e-liquid. One honest note before you order: OXVA does not include a USB-C cable in this kit, so you will need one of your own for charging – most phone cables work fine. Spare XLIM Top Fill cartridges are on the shelf here when the first pod eventually fades.
Design and Build
The Go 2 keeps the tall, slim stick shape of the original and refines the finishes: metals, ripples, shadows and a carbon option, with patterned IML panels that shrug off pocket wear better than plain paint. At 117.4 x 26.4 x 15mm and 45.9g it genuinely disappears into a shirt pocket. The only control on the body is the airflow slider on the side, and the only light is a three-colour breathing LED that shows battery level while you draw – no screen to crack, nothing to configure by accident.
Specifications
- Output: 5-30W Smart Mode (auto-set by pod)
- Battery: 1500mAh built-in
- Charging: USB-C, 5V/2A (80% in about 30 minutes)
- Pod: XLIM Top Fill cartridge, 3ml, top fill
- Resistances: 0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω (0.8Ω in the box)
- Display: none – 3-colour breathing LED
- Activation: auto-draw only
- Airflow: side slider, MTL to RDL
- Size and weight: 117.4 x 26.4 x 15mm, 45.9g
- Materials: PCTG + IML
Pods and Flavour
Smart Mode maps each pod to its sweet spot automatically: roughly 30W on the 0.4Ω, 25W on the 0.6Ω, 18W on the 0.8Ω and 12W on the 1.2Ω. The UniTech 2.0 mesh heats evenly, so flavour stays clean from the first fill to the last, and the top fill design means you refill without even removing the pod from the device. For nic salts, the 0.8Ω and 1.2Ω pods are the natural pairing; the 0.6Ω and 0.4Ω suit lower-strength freebase when you want a warmer, looser draw. Browse our saltnic juices for matches.
Battery and Charging
1500mAh is a lot of battery for a kit with no screen to feed. OXVA rate it at up to five days on the 0.8Ω pod for lighter users; in our experience a typical vaper should expect two to three days, and heavy users a solid day and a half. When it does run down, 2A charging gets you to about 80% in half an hour – a coffee stop is enough to rescue a dead battery.
How to Use the Xlim Go 2
Fill the pod through the top port, let it sit five to ten minutes so the coil soaks, and click it into the device. There is nothing to switch on. Draw to vape, slide the airflow to tighten or loosen the pull, and watch the LED colour: it shifts as the battery drops, and a red glow means charge soon. When flavour fades after a week or two, swap the pod – the device itself is built to be reused for a long time.
Xlim Go 2 vs the Original Xlim Go
Against the first-generation Xlim Go, the Go 2 grows the battery from 1000mAh to 1500mAh, moves to the newer UniTech 2.0 pods for better flavour, and keeps everything people liked: the same weight class, the same slider airflow, the same zero-learning-curve draw. If your original Go is still going strong there is no emergency, but as an upgrade or a first kit, the Go 2 is the better buy today.
Who Should Buy the Xlim Go 2?
Buy it if you are moving off disposables and want the same grab-and-go feel with refillable savings, or if you want a featherweight backup kit that never asks you to think. Skip it if you enjoy adjusting wattage and watching a screen – that is what the Xlim Pro 3 and XLIM 3 Ultra further down our OXVA shelf are for.
What Is in the Box?
- 1 x OXVA Xlim Go 2 device
- 1 x XLIM Top Fill Cartridge 0.8Ω (fitted)
- 1 x Use suggestion card
- 1 x User manual
No USB-C cable is included in this kit.
Available Colors
- Metal Silver
- Metal Blue
- Blue Ripple
- Green Ripple
- Pink Ripple
- Light Brown Shadow
- Black Shadow
- Black Carbon
Delivery in Dubai and Across the UAE
Order from Vapor Fantasy and your kit is on its way fast. We deliver across Dubai in about 60 minutes, and we ship to Abu Dhabi, Sharjah, Ajman and the rest of the UAE as well. Payment is cash on delivery, so you pay when your order is in your hand, and delivery is free on orders over AED 300. Every kit we sell is a genuine product supplied for the UAE market.
FAQs
How much is the OXVA Xlim Go 2 in Dubai?
It is 78 AED at Vapor Fantasy, with delivery across Dubai in about 60 minutes and cash on delivery available.
Which pods fit the Xlim Go 2?
Every XLIM cartridge fits: Top Fill, V2 and EZ pods in 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω. The kit starts you off with a 0.8Ω top fill pod.
Is a charging cable included?
No. OXVA leaves the USB-C cable out of this kit, so use any standard USB-C cable you already own – charging is 5V/2A.
How long does the battery last?
Up to five days for light use on the 0.8Ω pod by OXVA’s rating; most people will see two to three days, and a recharge to 80% takes about 30 minutes.
Is the Xlim Go 2 good for nic salts?
Yes – pair the 0.8Ω or 1.2Ω pod with your usual salt strength for a tight, cigarette-style draw. The lower resistances are better with lower-strength freebase liquids.
Looking for more OXVA kits and pods? Browse the full pod system range at Vapor Fantasy.
Reviews
There are no reviews yet.